|
|
| | |
|
Using the Slider Pods
 |
Positioning the Slider Pods:
- Locate the (2) set screws on the bottom of the Slider Pod (fig 1)
- Loosen the set screws.
- With the set screws loose, rotate and shift the vacuum pod to the desired position.
- Tighten the set screws and make parts!
Replacing the Slider Pod Top:
- Locate and loosen the (2) set screws on the bottom of the Slider Pod (fig 1).
- Rotate the pod base, exposing (4) flathead screws.
- Using a 5/32" hex key wrench, remove the (4) flathead screws (fig 2 & 3).
- Remove the pod top from the pod (fig 5).
|
| |
| | |
|
|
|